
Tomocube adds 3D fluorescence imaging to Holotomography Microscopy for World First
HT-2 microscope facilitates three-dimensional fluorescence and optical diffraction tomography of live cells with minimal stress on cells
27 November 2018, Daejeon, South Korea: The HT-2 from Tomocube is the world’s first microscope to combine both holotomography and 3D fluorescence imaging into one unit. Capable of simultaneously capturing high resolution 3D optical diffraction tomography and 3D fluorescence images, the new microscope enables long-term tracking of specific targets in live cells while minimising stress. The capability to easily deliver holotomography and fluorescence correlative analysis in 2D, 3D and 4D will enable researchers and clinicians to open new frontiers in bioscience and better understand, diagnose, and treat disease.
“Research and diagnosis in the life sciences depends on the information that can be found using cellular analysis,” says Aubrey Lambert, Tomocube’s Chief Marketing Officer. “Current microscopy techniques limit the quantity and quality of information available to researchers and clinicians and harm the living cells during long-term studies, but the HT-2 is set to overcome these limitations.”
The new microscope builds on the novel holotomographic technology first shown in the Tomocube HT-1, providing morphological, chemical and mechanical properties of cells through the 3D refractive index (RI) tomograms but adding molecular specificity information through the fluorescence imaging capability. The highly detailed fluorescence images show the position of specific target organelles or structures in living cells, while consecutive measurements of time-lapse 3-D RI tomography enables the monitoring of cells and their structures with minimal stress.
The HT-2 incorporates a customisable three-channel LED light source (385, 470 and 570 nm) and a motorized Z-drive with a step resolution of 150 nm to generate highly detailed Z-stack images. The TomoStudio software suite controls all the functionality of the HT-2 and provides fast imaging capability and 2D/3D/4D visualization of the cellular images based on 3D RI distributions of the cells and tissues. At its core is the same patented complex digital micromirror device (DMD) optical light shaper used in the Tomocube HT-1. Consisting of several hundred thousand micromirrors arranged in a rectangular array, the DMD eliminates the need for moving parts in the lightpath and delivers stable performance during long-term studies.
Benefits
- Correlative microscopy in one instrument – HT-2 provides high-quality 3D images of both holotomography and 3D fluorescence for each sample.
- Quantitative data marked with fluorescence – HT-2 provides morphological (volume, surface area, projection area, sphericity and ellipticity), chemical (dry mass, concentration) and mechanical (cell deformability) properties of cells with 3D refractive index (RI) tomogram. Moreover, fluorescence image provides information about molecular specificity.
- Live cell molecular and holographic imaging with minimal stress on cells – Simultaneous measurement capability of time-lapse 3-D RI tomography and fluorescence image allows long-time tracking of specific targets in live cells. The fluorescence image provides the position of specific target organelles or structures in live cell, and consecutive measurements of time-lapse 3-D RI tomography enables the monitoring of cells and their structures with minimal stress.
Image
The new Tomocube HT-2 holotomography microscope, shown with its maglev-based antivibration TomoPlate and custom-made controllers for temperature and gas. To download the image, please use this link:
http://www.catalystforcontent.com/uploads/simplex/images/pr/images/Tomocube_HT-2.png
About Tomocube, Inc.
Tomocube is dedicated to delivering products that can enhance biological and medical research via novel optical solutions that can assist in understanding, diagnosing, and treating human diseases. Our microscope platform enables researchers to measure nanoscale, real-time, dynamic images of individual living cells without the need for sample preparation through the measurement of 3D refractive index tomograms. This enables researchers and clinicians to work with primary cells and non-invasively observe label-free 3D dynamics of live cells and tissues, make quantitative measurements and retrieve unique cell properties such as cell volume, cytoplasmic density, and surface area. Founded in 2016, Tomocube provides a series of HT microscopy to the market. Tomocube’s HT microscopy has been widely tested and used in various research and medical institutes around the world. To find out more about Tomocube, visit www.tomocube.com or contact info@tomocube.com.
Related Posts




Lumencor, Inc. named Makers & Manufacturers Honoree in Portland Business Journal Product Innovation Awards, 2020


Raman Microspectroscopy, Colorimetry and Intensity Mapping of Large Displays With Microscopic Spatial Resolution -A Novel Solution from CRAIC Technologies


Fraunhofer starts development of refrigerant-free, energy-efficient electrocaloric heat pumps


LUCID Introduces Atlas10 camera featuring Sony Pregius S IMX530 Sensor over 10GBASE-T PoE at ITE 2019

Tomocube Holotomography Microscopy enables Label-free, Non-invasive Study of individual Spermatozoon




The NanoScan OP400 objective positioner - for high speed, high accuracy, repeatable Z stacking

LUCID Expanded 5GigE Atlas Camera Series with High-Performance Sony Pregius 16.8 MP and 19.6 MP CMOS Sensors





Lambert Instruments Introduces Toggel: A Next-Generation Fluorescence Lifetime Imaging Camera

Hitachi High-Technologies and Digital Surf announce new Hitachi map 3D software


HORIBA Scientific Announces New Aqualog Water Treatment Monitoring Software



Photometrics® Announces its Prime 95B™ Backside Illuminated (BSI) Scientific CMOS Camera Further Maximizes Signal to Noise Ratio with Award-Winning Computational Imaging Intelligence


WiTeC: TrueSurface – The Original Topographic Raman Imaging System, Redefined



WiTec: A novel and intuitive operating concept revolutionizes Raman imaging





WITec is pleased to announce the 14th Confocal Raman Imaging Symposium, from September 25th to the 27th, 2017 in Ulm, Germany.


Announcing a New Femtosecond Pulsed Laser Beam Combiner that Enables Deeper Tissue Imaging
Products
Contact
Microscopy News Portal
Am Ginster 6
21409 Oerzen, Germany
Email:
info@microscopy-news.com